Versatile, quick and effective solutions for tapping through holes with any reverse speed magnetic drill or impact wrench using JEI's impact socket adaptor
Provides a far more economical investment than using costly tapping heads and collets.
Can be mounted to an impact wrench, using JEI’s impact socket adaptor for an even faster site solution (max 12mm depth). Available with 1/2" or 3/4" drive.
Turbo™ M-Tap
A VERSATILE, QUICK AND EFFECTIVE SOLUTION TO PROVIDE A BOLT READY THREAD TO PRE-EXISTING HOLES.
Features a 19mm shank to fit directly into the cutter arbor
Ideal for use with JEI magdrill models HM50T and HM100T
For through holes only
Versatile for use in any magdrill with reverse and variable speed control
Can be used with an impact wrench using one of our impact socket adaptors, to tap through 12 mm depth
Available in sizes ranging from M8 - M30
Purchase as a handy 5 piece set including sizes M8, M10, M12, M16 & M20 plus both impact socket adaptors
Turbo™ M-TAP for use with a magnetic drill with reverse or an impact wrench using JEI'S Impact socket adaptors
Tapping with a Magnetic Drilling Machine
The Turbo™ M-Tap can be used directly in any magdrill with reverse for tapping through holes.
Tapping with an Impact Wrench
The Turbo™ M-Tap can be used with an impact wrench using our impact socket adaptor (available on 1/2" and 3/4" drive) up to a maximum depth of 12 mm.
MAG TAP 5 PIECE SET WITH IMPACT SOCKET ADAPTORS
The Turbo™ M-Tap's are available as a handy five piece set including tap sizes M8, M10, M12, M16 & M20 including both a 1/2" & 3/4" impact socket adaptor to enable the user to tap through holes with either a magdrill with reverse or an impact wrench.
Drill and Tap in One
A one piece drilling and tapping solution saving the customer both on cost and time. Requires a pilot hole.
Features a 19 mm shank to fit straight into cutter arbor
Ideal for use with JEI magdrill models HM50T and HM100T
Our tap holders are a cost effective solution for using DIN376 type taps directly in any magnetic drilling machine with reverse, to tap pre-existing holes.
Features a 19 mm shank to fit straight into the cutter arbor
Ideal for use with JEI magdrill models HM50T and HM100T
Do you need a solution for your pre-drilling application? Check out our range of annular broaching cutters and Turbo™ twist drills available in tapping sizes.
